1.Product featuressolid and flexible designdie-cast aluminum alloy or stainless steel shell,all metal parts outside are made of stainless steelbuilt in visual position indicatorquick-set camsprin Description
solid and flexible design
die-cast aluminum alloy or stainless steel shell,all metal parts outside are made of stainless steel
built in visual position indicator
quick-set cam
springloaded splined cam-----no adjustment required after
dual or multiple cable entries;
anti-loose bolt (FL-5)-the bolt attached to the upper cover will not fall off during removal and installation.
easy installation;
connecting shaft and mounting bracket according to NAMUR standard
multiple types Of display windows are optional
intensive polycarbonate;
standard 90°display (optional 180°)
eye standard color:open-yellow,close-red
aluminum alloys,stainless steel 316ss/316sl
zigzag or thread binding surface (FL-5 Series)
standard 2 electrical interfaces (up to 4 electrical interfaces,specifications NPT,M20,G,etc.)
O-ring seal:fine rubber,epdm,fluorine rubber and silicone rubber
stainless steel:namur standard or customer custom
anti shaft design(FL-5N)
applicable environment:conventional-25°C~60 ℃,-40°C~60 ℃,optional specification:-55℃~80℃
protection standard:IP66/IP67;optional;IP68
explosion-proof grade:Exdb IIC T6 Gb、Ex ia IIC T6Ga、Ex tb IIC T80 Db
anti-corrosion above WF2,neutral salt spray test tolerance for 1000 hours;
treatment:DuPont resin+anodizing+anti-ultraviolet coating
The unique gear meshing design can quickly and accurately adjust the sensing position of the sensor.The position of the switch can be easily set in the middle. The gears are dense and the upper and lower meshing design effectively avoids the deviation caused by vibration and effectively ensures the stability of the signal. High-precision gear+high-precision cam realizes micro-angle differentiation (deviation is less than +/-2%)
The upper cover is tightly connected with the shaft to prevent water and pollutants from entering the cavity when the indicator is damaged,and to ensure normal operation for a certain period of time.Internal metal parts (including the spindle): stainless steel
internal metal parts (including spindle): stainless steel;
terminal block:standard 8-bit terminal block (option 12-bit);
anti-static measures:internal ground terminal;
sensor or micro switch:mechanical/inductive proximity/magnetic proximity
internal corrosion protection:anodized/hardened
internal wiring:circuit board (FL-5 series)or wiring harness
options:solenoid valve/4-20mA feedback/HART protocol/bus protocol/wireless transmission
Sturdy and durable aluminum die-casting.
20 sets of terminals to the maximum.
Cams loaded with spring,the limit position can be easily set without tools.
The domed indicator with high visibility has a double-sealed construction,which prevents water inflow in the event of dome failure.
There are several additional options to choose from.